How to Install Bathroom Grab Bars
Do You Need To Know
How to Install Bathroom Grab Bars
Have you bought any grab bars for the first time and now thinking-How to install Bathroom Grab Bars? Don’t worry and no need to panic now. You are at the right place to learn about it. All you need to do is to go through this article and perform the steps as written. The certainly your question of how to install Bathroom Grab Bars will seem to as easy as one, two, and three.
You might be thing of calling a specialist to fix the grab bars for you but you don’t really need to spend your money on that person. Because you have a hidden genius in you and you need to just allow him to come out and perform.
How to Install Bathroom Grab Bars – It's Very Simple
So are you ready? Let’s start with the first step of installation that is the quality check. I call it the most important step when installing a bathroom grab bar because it is actually the safety defining step. Though it is not the installation step but before you know how to install Bathroom Grab Bars, you should know how strong the grab bar.
So first hit it politely against something like the chair or such thing, this is to verify that the grab bars are not brittle and will not break off and injure you in any condition. After completing the quality check now come to the point how to install Bathroom Grab Bars.
How to Install Bathroom Grab Bars – The Procedure
These are a few basic steps that you need to perform when installing the grab bars to make them firmly attach to the wall.
1. Locate the stud on the wall. You need to find them by either knocking against the wall or by some stud sensor. It is important that you fine the studs on the wall to screw the grab bars properly.
2. Now hammer a nail into the wall or plaster to find the exact outline of the stud. You should make sure that the wall is dry and the nail is in good condition. You should hammer at the spot that is easily patchable latter.
3. The next step is to mark the location for the grab bar. For that you may extend the stud marks down to the grab bar location with a level. You may use some masking tape to mark it.
4. Define the angle in which you are going to fix the grab bar. And mark the second point.
5. Drill the holes at the confirmed stud locations.
6. You may wish to enlarge the holes by the masonry bit. It depends on the drill-screw size.
7. Screw the bars in to the holes. Make sure that the screws penetrate at least one inch.
8. Give the bar a strong jerk and a solid yank to test the holding power.
In doing all this, make sure that you keep your hands and body safe from the damage. So how to install Bathroom Grab Bars is no more an issue. As I told you there is a genius in you and you need to let it come out and do amazing things for you because he now knows how to install Bathroom Grab Bars and he can learn everything.
Bathtub Safety Rail
